Set an link from the system wide nf to mv /etc/nf ln -sf /run/systemd/resolve/nf /etc/nf Maybe you want enable dhcpĭisable the old way to configure the network, enable systemd based network configuration, enable systemd generated nf (DNS resolution) and disable mv /etc/network/interfaces systemctl enable systemctl enable systemctl start systemctl disable systemctl enable rvice To get a root, login as user pi and call $ sudo su new file /etc/systemd/network/work Name is not importend, just the suffix/extension network. Login as root and configure a static IP Address. The serial port must be set to ttyS0 not ttyAMA0 on RPI3 at the latest raspbian release. Hint for Raspberry Pi 3 User (Comment from Adrian): It is import to enable the serial device within raspi-config. This is the first shot if you got any errors feel free to report it by a comment.įirst of all install raspbian in the well known way and update to the latest version of firmware and operating $ sudo su apt-get update & apt-get reboot The script at the end of the post installs knxd with support for EIB/KNX Router with TPUART and for USB EIB/KNX interfaces. This post is based on my previous posts regarding eibd. They are comparable to the IPv4 private network ranges (such as .y).In my previous posts EIB/KNX Router with an USB Interface and KNX/EIB Router with a TPUART module I described how to use a Raspberry PI as EIB/KNX Router with eibd.Įibd is no longer in development so I decided to give knxd, a fork of eibd, a try:-) The script attached at the end of the post is written for raspbian but should also work an all debian system with systemd imit system.

Unique local addresses (ULA) are local IPv6 addresses which are not routed on the internet. Using this configuration, your Fritz!Box will offer Pi-hole's IPv6 as local DNS server to its clients via DHCPv6 as well as Router Advertisement (RA/RDNSS, SLAAC). Local domain name (optional): Fritz!Box uses fritz.boxĭistribute Pi-hole as DNS server via IPv6 ¶.IP address of your DHCP server (router): IP of the Fritz!Box, standard is 192.168.178.1.

Local network in CIDR notation: Standard IP range of the Fritz!Box is 192.168.178.0/24.

The Conditional forwarding option is responsible for this. All other requests are sent to the upstream DNS server of the Pi-Hole.

Only those queries are sent to the Fritz!Box that attempt to determine hostnames for IP addresses (clients) of the local network.

The Fritz!Box may only be the upstream DNS server of the Pi-hole if Pi-hole is not the upstream DNS server of the Fritz!Box. Optional: Allow DNS queries only from the Pi-hole Optional: Increasing the priority of DNS requests Hostnames instead of IP addresses in Pi-hole's web interface - Conditional forwardingĭistribute Pi-hole as DNS server via IPv6 Pi-hole as upstream DNS server for your Fritz!Box Optional: Dual operation: LAN & VPN at the same timeĭistribute Pi-hole as DNS server via DHCP

Raspberry pi fritz box traffic monitor